Dyed Buttons

Step 1:

Assorted White Buttons before dyeing

- Cover work surface with a plastic table cover.
- Decide what colors you like and prepare dye according to the basic recipe below. Liquid dyes are more concentrated than powder dyes so use half as much dye. Always test color with fabric scrap or paper towel before dyeing buttons. If color is too light, add more dye; if it is too dark, add more water.
- Basic Recipe: Measure and mix 1 teaspoon liquid dye or 2 teaspoons powder dye with 1 Cup HOT Water. Shake liquid dyes before measuring. - Water should be about 140°F. If your tap water is not hot enough, heat some in the microwave or a tea kettle.
Pour dye and water into a plastic container; stir. Make sure container is deep enough.
- Immerse buttons in dye solution for 2 to 5 minutes. Stir occasionally and check color frequently. Remove buttons when desired color is achieved. - Rinse buttons. Then wash with soap and water, rinse and dry with paper towels.