Supplies
Rit DyeMore for Synthetics in Racing Red, Sapphire Blue and Daffodil Yellow
-
Pot for Dyeing
-
Plastic skeletons
-
Tongs
-
Rubber Gloves
-
Acetone
-
Measuring Cup and Spoon
-
Plastic Table Cover
-
Paper Towels
Time
Total: {{ partial.tKG3.total }}
Difficulty
Beginner Total: {{ partial.t62N.total }}
Instructions
- Wipe plastic skeleton with acetone and paper towel to remove any manufacturer’s finishes that may interfere with dye absorption.
- Heat 1 gallon of water on the stovetop to roughly 200ºF / 93ºC or greater.
- When water begins to simmer, add ¼ cup of well-shaken Racing Red DyeMore for Synthetics and stir well.
- Wearing rubber gloves, pick up the skeleton with tongs and carefully dip 1/3 of it into the dyebath. Keep the plastic skeleton dipped for 5-10 minutes, moving it around the dyebath to avoid harsh dyelines from forming and achieve a smooth gradient.
- Once desired color is achieved, remove from dyebath and rinse in cold water.
- Repeat steps 2-4 with Daffodil Yellow and Sapphire Blue DyeMore for Synthetics to create the rainbow ombre.
Posts You May Like