Time
Total: {{ partial.t8F6.total }}
Supplies
- All-Purpose Liquid Dyes in Aquamarine and Petal Pink
- Tie Dye Accessory Kit
- Color Stay Dye Fixative
- White Cotton Tote Bag
- Salt
- Baking Rack and Tray
- Measuring Cups and Spoons
- Plastic Table Cover
- Paper Towels
Difficulty
Intermediate Total: {{ partial.t8ZH.total }}
Instructions
- Prewash bag in warm, soapy water. This helps to remove any finishes that may interfere with dye absorption. Leave damp.
- Lay bag out flat and determine the center placement of each bullseye pattern. Pinch the center of each bullseye and secure with rubber bands. Place another rubber band roughly 1-2″ inches from the first one to create the rings in the bullseye. Repeat to create more as many bullseye patterns as desired.
- Set aside your bound bag to prepare your squeeze bottles.
- Wearing rubber gloves, mix 2 Tablespoons of well-shaken liquid dye with two cups of hot tap water in the squirt bottle. Add 1 tablespoon of salt and shake well. For this bag, we used Petal Pink and Aquamarine in our All-Purpose Liquid Dyes.
- Place bound bag on baking rack with a tray under it. This keeps the dye from puddling under the fabric.
- Squeeze Aquamarine dye onto body of the bag. Then, apply Petal Pink carefully in sections created by rubber bands. Make sure not to overlap edges of colors to keep them separated.
- To help set the dye, we recommend using your microwave. Place the dyed bag in the container that comes in the kit or simply plastic wrap and seal the edges. Place the wrapped fabric on a paper towel in the microwave and heat for 1 to 2 minutes. This will create a heat chamber that helps bond the dye with the fabric. Once the microwave is done, remove the shirt and open the plastic, letting it cool down.
- Before removing the rubber bands, we strongly recommend using Rit ColorStay Dye Fixative on the tee. It enhances the color, increases color retention and prevents dye from bleeding into white areas. Follow these instructions. If you are planning to apply the Fixative with a squirt bottle, mix 1/4 cup ColorStay Fixative with 2 cups of hot water and pour mixture into the squirt bottle.
- Carefully remove rubber bands with a scissors and unfold the fabric. Wash in warm water with a mild detergent, rinse and dry.
Posts You May Like
