Rainbow Mesh Beach Bag

May 27 2021

Whether you’re going to the farmers market or to the beach, this rainbow mesh bag will carry all your essentials every step of the way.

Supplies
Time
Total: {{ partial.t2HU.total }}
Difficulty
Beginner Total: {{ partial.t57P.total }}
Instructions
  1. Prewash bag in warm, soapy water. This helps to remove any finishes that may interfere with dye absorption. 
  2. Scrunch bag vertically and wrap rubber bands down the length of the bag.
  3. To prepare squeeze bottles follow the instructions below:
    1. Shake dye bottle well
    2. Wearing protective gloves, add 2 tsp of liquid dye or 1/4 tsp of powder dye to squeeze bottles.
    3. Add 1 tsp of salt if dyeing cotton, rayon, ramie or linen. Add 1 tsp of vinegar if dyeing silk or wool.
    4. Fill the remainder  of the squeeze bottle with hot tap water.
    5. Place one finger over the bottle cap and shake well to dissolve the dye. Use caution when removing the cap.
    6. If dyeing with multiple colors, repeat for each color.
    7. If temperature of dye mixture cools down during dye application, reheat mixture by microwaving the bottle for 15 seconds.
  4. Place bound bag on a baking rack over a tray to catch any excess dye.
  5. Apply dyes to create a rainbow
  6. Once you’re satisfied with the application, allow the bag to sit and absorb the dye for 30 minutes.
  7. After 30 minutes, apply Rit ColorStay Dye Fixative to maximize color retention and reduce color bleeding.
  8. Place bag in a the microwave tray provided with the Tie-Dye Accessory Kit and close lid by snapping tabs in place. Fabric must be completely damp when microwaved and cannot have any metal attached to it. 
  9. If the microwave wattage is 1,000 watts, microwave for 2 minutes. If the wattage is 700 watts, microwave for 3 minutes. Do not leave microwave unattended while in use.
  10. After microwaving, let tray sit for 5 minutes. Open the lid and allow the garment to cool off for another 5 minutes or until it is cool to the touch.
  11. Rinse in cool water until the rinse water being to run clear and carefully remove rubber bands.
  12. Wash in cold water with a mild detergent, rinse and dry.
Posts You May Like
We send awesome emails.

We send awesome emails.

We send awesome emails.

Be the first to know about new products, dye techniques and more!
{{ formErrors('newsletter-modal', 'email') }}
{{ formErrors('newsletter-modal', 'other') }}
Thank you for subscribing!
Thank you for subscribing!