Supplies
- Cotton Baby Onesie
- Rit All-Purpose Liquid Dye - Coral
- 2 Gallon Plastic Tub or Bucket
- Measuring Cup
- Rubber Bands
- Salt
- Liquid Dish Detergent
- Rubber Gloves
- Plastic Table Cover
- Rit ColorStay Dye Fixative (Recommended)
Time
Total: {{ partial.tGZ9.total }}
Difficulty
Beginner Total: {{ partial.t7ZF.total }}
Instructions
- Cover table with plastic. Gather supplies.
- For best results, pre-wash onesie, rinse and leave wet. This will help to remove any finishes that may interfere with dye absorption.
- Scrunch up onesie and hold together with several rubber bands. The tighter you wrap, the more white space you will have.
- To prepare dyebath: Fill large plastic tub or bucket with very hot tap water (140F). If water is not hot enough, heat water in a cook pot or teapot. Shake dye bottle before pouring. Wearing rubber gloves, add ¼ cup of dye to water; stir well.
- For best results, add ½ cup of salt to dyebath if dyeing cotton, rayon or linen. This helps to intensify the color. Then add a squirt of liquid dish detergent. Stir well.
- Test dye color by dipping a paper towel into the dyebath. If color is too light, add more dye. If color is too dark, add more water.
- Immerse bundled onesie in dyebath. For a high contrast pattern (more white areas), keep the bundle in the dye for about 3 to 5 minutes to keep the bound-up part dye-free. For more color and less white areas, let them set in the dyebath for 10 to 20 minutes.
- When desired color is achieved, remove the baby onesie from the dyebath. Squeeze out excess dye. Do not remove rubber bands.
- Recommended: To enhance the color and reduce color bleeding, use Rit ColorStay Dye Fixative immediately after dyeing and before washing, following package instructions. Let bundles set in fixative for 20 minutes.
- Remove rubber bands, rinse onesie under cold running water until water begins to run clear.
- Machine or hand wash with mild detergent, rinse and dry.
Posts You May Like