Our hearts are with those impacted by Hurricane Harvey. Until September 30th, we will be donating 5% of all online orders to the Hurricane Harvey Recovery Fund.
               

The Guilty Crafter's Dye-I-Y studio

By Angela Daniels

March 4, 2016

Visit me on the web:

www.facebook.com/pg/TheRitStudio/videos/

Project Description

Using Elmer's Blue Gel glue as a dye resist is one of my favorite dyeing techniques. It's fast, inexpensive and there are no limits to what you can write or draw on fabric.

 

Flag as Inappropriate
Prep, dyeing & Rinse time: About 2 hours

Rit Products Used

 

You'll Also Need

  •   glass bowl large

  •   glue

  •   rubber gloves

Step By Step

  1. Pro-tip: ALWAYS pre-wash clothing and fabric before you dye! There are factory finishes on new clothing that can coat the fabric fibers and interfere with dye absorption. Occasionally, this could lead to "blotchy" dye jobs. Personally, I also avoid using fabric softener sheets in the dryer with articles of clothing I'm about to dye for the same reason (haven't proved this is an issue but it seems logical to me).

  2. There are very few supplies needed for this technique. Elmer's Blue Gel glue works best because, with it's light blue tint, it's easy to see where you are "writing" with it. It is also completely washable so after the final dyeing and rinsing stage, you can simply wash out the excess glue.

  3. *GLUE* Once your tshirt has been completely washed and dryed, you can now "write" on it directly with your bottle of Elmer's Blue Gel Glue. Freehand is totally fine but for this "namaste" tank top, I chose a font I really liked and printed out a piece of computer paper with the word "namaste" on it. I placed the sheet of paper underneath the top layer of the tshirt with a magazine underneath for stability (and to make sure the glue didn't seep through the top layer of the shirt to the back layer- you don't want that. Always put a barrier between the front and back layer). *DRY* The key to success in a glue resist project is to make sure the glue is COMPLETELY DRY before you move to the dye process. Still wet? The glue will just wash away in the dye bath leaving no resist or only partial resist. So be patient. I sometimes use a hairdryer to speed up the process in a pinch. *Dye* Simply follow your usual dye directions. I filled up my kitchen sink about 1/2 way and used about 1/2 a bottle of Rit liquid dye in Kelly Green. Pro-tip: Have the water hot but not as hot as you might usually do for a dye bath (hot straight out of the kitchen tap worked for this project). If the water is too hot, the glue design could start to melt and wash away before you are ready for that to happen). Soak until you achieve your desired color.

  4. Rinse well in cold water until the water runs clear. If there is still glue on the shirt, wash gently in warm water with mild detergent. Dry and wear. Namaste!

  5. Check out the photo on how to do this step.

  • http://www.ritdye.com The Ritsters

    What a fun new yoga top!

 

X

Home

Store Locator

Techniques

Color Library

FAQ

Blog

Dyed by You

Contact Us

Online Store